Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1 Instrukcja Użytkownika Pobierz pdf (Strona 27)

www.johnsonsystems.com 27

39. HARD-KEY View the microcontroller’s unique six-character hard-key code.

JS-ICON

™

Series dimmer racks may be shipped with an invalid hard-key code of

000000. A valid hard-key must be entered before the run time (RTIME) counter

reaches 2160 hours / 90 days. If the run time expires without a valid hard-key the

LCD display will show a runtime counter error (RTC ERR!) and all dimmer control

outputs will be disabled.

HARD-KEY A dash (-) between hard and key represents a valid hard-key.

HARD KEY A blank space between hard and key represents an invalid hard-key.

K:XXXXXX Shows the unique six-character hard-key code (XXXXXX).

K:XXXXXX Follow the procedure below to enter the menu and modify the hard-key.

K:XXXXXX Press and hold EXECUTE and then ESCAPE at the same time for 4-5 seconds.

K>XXXXXX A pointer (>) appears to indicate hard-key modication is activated.

K>XXXXXX Press MENU ( ) to modify the rst hard-key character.

K:>XXXXX Press EXECUTE to advance to the second hard-key character.

K:>XXXXX Press MENU ( ) to modify the second hard-key character.

K:X>XXXX Press EXECUTE to advance to the third hard-key character.

K:X>XXXX Press MENU ( ) to modify the third hard-key character.

K:XX>XXX Press EXECUTE to advance to the fourth hard-key character.

K:XX>XXX Press MENU ( ) to modify the fourth hard-key character.

K:XXX>XX Press EXECUTE to advance to the fth hard-key character.

K:XXX>XX Press MENU ( ) to modify the fth hard-key character.

K:XXXX>X Press EXECUTE to advance to the sixth hard-key character.

K:XXXX>X Press MENU ( ) to modify the sixth hard-key character.

Press ESCAPE to exit the menu and save the desired hard-key code.

Press RESET to exit the menu without saving.

The menu will automatically timeout after 2 minutes of inactivity and save.

NOTE: Be sure to record and le the hard-key code on page 31 for future reference.

40. SERIAL# View the microcontroller’s unique six-character silicone serial number.

XXXXXX Shows the unique six-character serial number.

41. VERSION View the microcontroller’s software version.

VER X.X Shows the microcontroller’s software version.

42. EEPROM View the type of EEPROM memory module plugged in.

All JS-ICON

™

Series dimmer racks come with a removable EEPROM memory module

located on the MADD-24 board. The EEPROM memory module inserts into the

PORT1 connector located on the upper center of the board, and may be removed for

safe storage.

The EEPROM type is programmed for parameter (P) or rmware (F) operation. A

parameter EEPROM is used to backup all of the current conguration settings. A

rmware EEPROM is used to update the current rmware version running on the

MADD-24 microcontroller to the rmware version saved on the EEPROM.

The EEPROM memory module supplied with all JS-ICON

™

Series dimmer racks is

a parameter type with all of the factory default conguration settings saved onto it

before shipping.

MADD24-P Indicates the EEPROM memory module is for a MADD-24 microcontroller.

MADD24-P Indicates the EEPROM type is programmed for parameter (P) operation.

XXXXXX Press EXECUTE to display the silicone serial number parameter.

DISABLED Press EXECUTE and menu feature is disabled for factory use only.

MADD24-F Indicates the EEPROM type is programmed for rmware (F) operation.

VER X.X Press EXECUTE to display the version (VER) of the rmware.

DISABLED Press EXECUTE and menu feature is disabled for factory use only.

NONE! Indicates the EEPROM memory module is not installed.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Komentarze do niniejszej Instrukcji

Brak uwag

Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1 Instrukcja Użytkownika Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oświetlenie Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1