Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1 Instrukcja Użytkownika Pobierz pdf (Strona 20)

www.johnsonsystems.com

If a dimmer is patched to both DMX A and DMX B input channels, the DMX levels are

merged and highest-takes-precedence (HTP).

Press EXECUTE to enter the menu and congure the DMX A patch.

Press MENU ( ) to scroll through and select the patching method.

MANUAL? Press EXECUTE to patch each of the dimmers manually (MANUAL).

DIM DMXA The top line shows the dimmer (DIM) and (DMXA) address headings.

001<999? The second line shows the dimmer (DIM) and (DMXA) address values.

024<999? Press MENU ( ) to select the dimmer (DIM) from 001 to 024 to patch.

001<999? Press MENU ( ) and MENU ( ) at the same time to toggle back to 001.

001 999? Press EXECUTE to advance and select the DMXA address for the dimmer.

001 999? DMXA is initialized at 999 to indicate the dimmer is not patched.

001 999? ? indicates the DMXA address (513 to 999) is invalid and is not patched.

001 999? The cursor (_) position indicates the DMXA digit to be edited.

001 999? Press EXECUTE to move the cursor to the right, under the digit to be edited.

001 999? Press ESCAPE to move the cursor to the left or to exit the menu.

001 512 Press MENU ( ) to select the DMXA address from 001 to 512.

001 999? Press MENU ( ) and MENU ( ) at the same time to toggle back to 999.

Repeat until all required dimmers are manually patched.

BLOCK? Press EXECUTE to patch the dimmers in a sequential block (BLOCK).

DIM#:001 Press EXECUTE to select the rst dimmer number (DIM#) in the block.

DIM#:024 Press MENU ( ) to edit the dimmer number (DIM#) from 001 to 024.

DIM#:001 Press MENU ( ) and MENU ( ) at the same time to toggle back to 001.

DMXA:001 Press EXECUTE to select the DMX A (DMXA) start address for the block.

DMXA:512 Press MENU ( ) to edit the DMX A (DMXA) start address from 001 to 512.

DMXA:001 Press MENU ( ) and MENU ( ) at the same time to toggle back to 001.

#DIM:001 Press EXECUTE to select the number of dimmers (#DIM) in the block.

#DIM:024 Press MENU ( ) to edit the number of dimmers (#DIM) from 001 to 024.

#DIM:001 Press MENU ( ) and MENU ( ) at the same time to toggle back to 001.

PROCEED? Press EXECUTE to proceed.

SURE ??? Press EXECUTE to proceed.

DONE !!! Indicates the sequential block patch has been completed.

Repeat until all required blocks of sequential dimmers have been patched.

Press ESCAPE to exit the menu.

CLEAR??? Press EXECUTE to clear the entire patch.

SURE ??? Press EXECUTE to proceed.

DONE !!! Indicates the entire patch has been cleared.

Press ESCAPE to exit the menu and save the selected patch.

Press RESET to exit the menu without saving.

The menu will automatically timeout after 5 minutes of inactivity and save.

NOTE: Be sure to BACKUP any conguration changes!

NOTE: With DMX patch mode activated, any conguration within the ADDRESS,

DMX MODE, 2 RM SET and DC PATCH menus is ignored, and the DMX patch

congured within this menu takes precedence.

13. DMXB PAT Patch the 24 dimmer (PWM) outputs to any DMX B input channel.

Refer to the DMXA PAT menu for further information.

The DMXA PAT menu is used to patch dimmers to DMX A input channels, while the

DMXB PAT menu is used to patch dimmers to DMX B input channels.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Komentarze do niniejszej Instrukcji

Brak uwag

Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1 Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oświetlenie Johnson-systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1